Secondary Camshaft Drive Chain Guide Installation - Left
WARNING: This page is about a different variant/trim than selected.
- Ensure that the left secondary camshaft drive chain guide (2) is being installed.
- Position the left secondary camshaft drive chain guide.
- Install the secondary camshaft drive chain guide bolts.
Tighten: Tighten the secondary camshaft drive chain guide bolts to 23 N.m (17 lb ft).
Fig 1: Identifying Left & Right Secondary Camshaft Drive Chain Guide & Upper Primary Camshaft Drive Chain Guide
NOTE:
Refer to Fastener Notice
in Cautions and Notices.