LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 3 Of 5)) >> Off-Vehicle Repair Instructions - Part 2 >> Intake Manifold Assemble >> Lower Intake Manifold Assemble Procedure

Lower Intake Manifold Assemble Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing & Installing Fuel Injector Rail
    GM1211091Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel injector rail.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel injector rail bolts.

    Tighten:  Tighten the fuel injector rail bolts to 10 N.m (89 lb in).

    3. Fig 2: Removing & Installing Fuel Injector Wiring Harness
    GM1211088Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel injector wiring harness connector.
scientia non olet · About LEMON Manuals