LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 3 Of 5)) >> Off-Vehicle Repair Instructions - Part 2 >> Camshaft Cover Disassemble

Camshaft Cover Disassemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Removing & Installing Camshaft Cover Bolts
    GM1211016Courtesy of GENERAL MOTORS CORP.
  1. Remove the camshaft cover bolts.
  2. Remove and discard the camshaft cover bolt grommets.
    3. Fig 2: Removing & Installing Camshaft Cover Gasket
    GM1211021Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not reuse the camshaft cover gasket and ignition coil seals.
  3. Remove and discard the camshaft cover gasket.
    4. Fig 3: Removing & Installing Ignition Coil Seals
    GM1211024Courtesy of GENERAL MOTORS CORP.
  4. Remove and discard the ignition coil seals.
scientia non olet · About LEMON Manuals