LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 1 Of 5)) >> On-Vehicle Repair Instructions - Part 1 >> Primary Camshaft Drive Chain and Sprockets Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the spark plugs in order to ease crankshaft/engine rotation. Refer to Spark Plug Replacement in Engine Controls - 3.6L (LY7).
  2. Remove the engine front cover. Refer to Engine Front Cover Replacement .
  3. Remove the right bank secondary camshaft drive chain tensioner. Refer to Secondary Camshaft Drive Chain Tensioner Removal - Right .
  4. Remove the right bank secondary camshaft drive chain shoe. Refer to Secondary Camshaft Drive Chain Shoe Removal - Right .
  5. Remove the right bank secondary camshaft drive chain guide. Refer to Secondary Camshaft Drive Chain Guide Removal - Right .
  6. Remove the right bank secondary camshaft drive chain. Refer to Secondary Camshaft Drive Chain Removal - Right .
  7. Remove the primary camshaft drive chain tensioner. Refer to Primary Camshaft Drive Chain Tensioner Removal .
  8. Remove the primary camshaft drive chain upper guide. Primary Camshaft Drive Chain Guide Removal - Upper .
    9. Fig 1: View Of Primary Camshaft Timing Chain
    GM902843Courtesy of GENERAL MOTORS CORP.
  9. Remove the primary camshaft timing chain. Refer to Secondary Camshaft Drive Chain Removal - Right .
scientia non olet · About LEMON Manuals