LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 1 Of 5)) >> On-Vehicle Repair Instructions - Part 1 >> Engine Mount Replacement - Left >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Install a screw jack with a block of wood under the oil pan for support.
  3. Remove the lower engine mount retaining nut.
    Fig 1: Identifying Frame Mounting Nuts
    GM785352Courtesy of GENERAL MOTORS CORP.
  4. Raise the engine using the screw jack until the weight is removed from the mount.
    5. Fig 2: View Of Left Engine Mount
    GM1283928Courtesy of GENERAL MOTORS CORP.
  5. Remove the upper engine mount retaining nut.
  6. Remove the engine mount from the vehicle.
scientia non olet · About LEMON Manuals