LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 3.6L (Ly7) (Repair Procedures -- 1 Of 5)) >> On-Vehicle Repair Instructions - Part 1 >> Drive Belt Replacement - Power Steering and Air Conditioning >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Power Steering & A/C Drive Belt Routing
    GM1285183Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator and water pump drive belt. Refer to Drive Belt Replacement - Generator and Water Pump .
  2. Rotate the drive belt tensioner clockwise in order to release the drive belt tension.
  3. Remove the drive belt from the power steering pulley.
  4. Slowly release the drive belt tensioner.
  5. Remove the drive belt from the accessory drive pulleys.
scientia non olet · About LEMON Manuals