LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transmission Troubleshooting) >> Troubleshooting >> No Reverse or Slips in Reverse

No Reverse or Slips in Reverse

WARNING: This page is about a different variant/trim than selected.
No Reverse or Slips in Reverse

Check Causes
DEFINITION: A large engine RPM increase is noted with little or no vehicle rearward speed increase during the following conditions:
  • The engine is running.
  • The transmission is in Reverse range.
  • The vehicle is stopped or moving slowly.
  • The vehicle brakes are not applied.
  • The throttle is opened 25 percent or greater.
Direct and Reverse Clutch Assembly
  • Damaged reverse clutch housing ball check valve
  • Damaged or cut piston
  • Damaged or worn clutch plates
Control Valve Body Accumulator Assembly
  • Reverse lockout valve stuck
  • TCC PWM solenoid valve leaking
Selector Lever Adjustment
scientia non olet · About LEMON Manuals