Conditions for Enabling the Skip Shift Solenoid and Lamp

WARNING: This page is about a different variant/trim than selected.

The vehicle speed sensor (VSS) is between 24-31 km/h (15-19 mph).
The engine coolant temperature (ECT) is 77°C (171°F) or greater.
The barometric pressure (BARO) is greater than 76 kPa.
The accelerator pedal position (APP) is less than 21 percent.
Once the 1-4 Upshift solenoid is enabled the solenoid will not be re-enabled until the vehicle speed returns to 1 km/h (1 mph) and the conditions for enabling the 1-4 Upshift solenoid are met.