Installation Procedure
- Position the center trim panel to the I/P.
- Install the screws securing the I/P center trim panel.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the center HVAC air outlet. Refer to Deflector Replacement - Instrument Panel Air - Center in Heating, Ventilation, and Air Conditioning.
- Install the HVAC control. Refer to HVAC Control Module Replacement in HVAC Systems - Automatic (Includes Electronic and Dual Zone).
- Install the radio. Refer to Radio Replacement in Entertainment.
NOTE:
Refer to Fastener Notice in Cautions and Notices.