LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Knee Bolster
    GM714046Courtesy of GENERAL MOTORS CORP.
  1. Install the knee bolster trim (1).
    2. NOTE: Refer to Fastener Notice .
  2. Install the retaining screws (2).

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  3. Install the lever retainers screws.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  4. Install the left hand closeout panel. Refer to Closeout/Insulator Panel Replacement - Left .
scientia non olet · About LEMON Manuals