LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Carrier Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) retainer. Refer to Instrument Panel (I/P) Retainer Replacement .
  2. Remove the HVAC ducts. Refer to Air Outlet Duct Replacement - Instrument Panel (I/P) - Upper Left , Air Outlet Duct Replacement - Instrument Panel (I/P) - Upper Right , and Defroster Duct Replacement - Windshield in Heating, Ventilation and Air Conditioning.
    3. Fig 1: Identifying Pedal Bracket Nuts (Vehicles With Manual Transmission)
    GM836289Courtesy of GENERAL MOTORS CORP.
  3. On vehicles with a manual shift transmission, loosen the nuts (2) on the pedal bracket.
  4. Remove the parking brake pedal assembly. Refer to Park Brake Pedal Assembly Replacement (LHD)Park Brake Pedal Assembly Replacement (RHD) in Park Brake.
    5. Fig 2: Identifying Pedal Bracket Nuts (Vehicles With Automatic Transmission)
    GM786925Courtesy of GENERAL MOTORS CORP.
  5. On vehicles with an automatic transmission, loosen the 2 nuts (1) securing the brake pedal bracket to the carrier.
    6. IMPORTANT: Note the location and routing of the wiring harness and harness retainers.
  6. Disconnect all electrical wire retainers from the carrier assembly.
    7. Fig 3: Removing & Installing Carrier-To-Cowl Nuts
    GM788231Courtesy of GENERAL MOTORS CORP.
  7. Remove the nuts securing the carrier to the cowl.
  8. Remove the carrier assembly.
scientia non olet · About LEMON Manuals