LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Replacement - Front Floor >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Front Floor Console
    GM706062Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Position the console on the floor of the vehicle.
  2. Install the screws (1) securing the console to the floor.

    Tighten:  Tighten the fasteners to 25 N.m (18 lb ft).

  3. Fig 2: Removing & Installing Console Side Trim Panels
    GM706058Courtesy of GENERAL MOTORS CORP.
  4. Install the console side trim panels (1).
  5. Fig 3: Identifying Shift Indicator Electrical Connector
    GM706048Courtesy of GENERAL MOTORS CORP.
  6. Install the shift indicator lamp electrical connector (2).
  7. Fig 4: Removing & Installing Console Trim Plate
    GM706055Courtesy of GENERAL MOTORS CORP.
  8. Install the shifter trim cover (1).