Installation Procedure
- Install the armrest.
- Install the screws (1) securing the armrest to the console tray.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the screws (1) securing the armrest to the console.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the top cover.
- Insure the tabs (1) securing the top cover are locked into place.
- Reinstall the side covers.
NOTE:
Refer to Fastener Notice in Cautions and Notices.