LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> CTS Base, 3.2 N >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Right Closeout/Insulator Panel
    GM713948Courtesy of GENERAL MOTORS CORP.
  1. Connect the courtesy lamp electrical connector (1).
  2. Align the closeout panel on the I/P.
  3. Push upward on the panel in order to secure the locking tabs (2).
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the closeout retaining screws (3)

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals