LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Set the I/P cluster (2) partially into the retainer.
  2. Connect the electrical connectors (1).
    Fig 1: Installing I/P Cluster & Connecting Electrical Connectors
    G02179189Courtesy of GENERAL MOTORS CORP.
  3. Align the I/P cluster to the retainer.
    NOTE: Refer to FASTENER NOTICE  in Cautions and Notices.
  4. Install the 4 fasteners (3).

    Tighten 

    Tighten the cluster fasteners to 1.5 N.m (14 lb in).

  5. Install the I/P cluster trim panel. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER   . 
  6. Install the I/P upper trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER   . 
scientia non olet · About LEMON Manuals