Installation Procedure

Align the center console hinge (2) to the armrest.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the screws (1).
Tighten

Tighten the screws to 1.6 N.m (14 lb in).

Fig 1: Installing Console Door Hinge & Screws
Courtesy of GENERAL MOTORS CORP.
Install the armrest inner trim panel (2) to the armrest.
Install the screws (1) to the armrest inner trim panel (2).
Tighten

Tighten the screws to 1.6 N.m (14 lb in).

Fig 2: Installing Armrest Inner Trim Panel & Screws
Courtesy of GENERAL MOTORS CORP.
Install the console tray (2) to the console door hinge.
Install the screws (1).
Tighten

Tighten the screws to 1.6 N.m (14 lb in).

Fig 3: Installing Console Tray & Screws
Courtesy of GENERAL MOTORS CORP.
Install the cellular telephone docking station, if equipped with a Cellular phone, UV8. Refer to CELLULAR TELEPHONE DOCKING STATION REPLACEMENT in Cellular Communications.
Align the console lid and hinge assembly to the center console.
The center console door has alignment pins next to the top 2 hinge screws.
Install the top 2 console hinge screws (1).
Tighten

Tighten the screws to 1.6 N.m (14 lb in).

Fig 4: Installing Console Door Hinge & Screws
Courtesy of GENERAL MOTORS CORP.
Install the air vent cover (2).
Install the console rear cover screws (2).

Fig 5: Installing Console Rear Cover Screws
Courtesy of GENERAL MOTORS CORP.
Install the rear ashtray and lighter assembly to the center console. Refer to CONSOLE ASHTRAY/LIGHTER (REAR) .
Inspect the console compartment door for proper operation.