LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> Escalade ESV >> Repair and Diagnosis >> External Pages >> Different car >> Section 501 (Engine Mechanical (Repair Instructions -- 1 Of 3) -- 4.8L, 5.3L & 6.0L) >> Repair Instructions (On-Vehicle & Off-Vehicle - Part 1) >> On-Vehicle Repair Instructions >> Crankcase Ventilation Hoses/Pipes Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hose as necessary.
  2. Install the vent hose to the throttle body and the valve rocker arm cover.
    3. Fig 1: View Of Throttle Body To Valve Rocker Arm Cover PCV Hose
    GM1235681Courtesy of GENERAL MOTORS CORP.
  3. Install the PCV hose to the intake manifold and valve rocker arm cover.
    4. Fig 2: View Of PCV Hose
    GM1201537Courtesy of GENERAL MOTORS CORP.
  4. Install the engine sight shield. Refer to Engine Sight Shield Replacement (4.8L, 5.3L, and 6.0L (RPO LQ4))  or Engine Sight Shield Replacement (6.0L (RPO LQ9)) .
scientia non olet · About LEMON Manuals