LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> DeVille Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement - Right >> Removal Procedure

Removal Procedure

Important:  The knee bolster trim panel must be replaced, not repaired, if there is any visible damage.

  1. Remove the knee bolster trim panel (1) by grasping at the top and the bottom and by pulling rearward.
  2. Remove the knee bolster from the vehicle.
    Fig 1: Removing Knee Bolster Trim Panel
    G02099537Courtesy of GENERAL MOTORS CORP.