LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> DeVille Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Knee Bolster Replacement - Left (Without UV2) >> Removal Procedure

Removal Procedure

Important:  The knee bolster trim panel (1) must be replaced, not repaired, if there is any visible damage.

  1. Remove the knee bolster trim panel (1) by grasping at the top and the bottom and by pulling rearward.
  2. Remove the knee bolster trim (1) from the vehicle.
    Fig 1: Removing Knee Bolster Trim
    G02099539Courtesy of GENERAL MOTORS CORP.