Vehicle Information Display: Notes

The vehicle information display parameters are available to the driver when the ignition is in the RUN position. The driver navigates through the various parameters displayed on the driver information center (DIC) using the INFO Up and INFO Down buttons. Some parameters can be reset by briefly pressing the INFO RESET button.

Some parameters require information from other modules. If the instrument cluster (IPC) has not received data for a parameter when the time has come to display the parameter, the IPC will blank the display on the DIC. If the IPC has determined that a class 2 communication failure with one of the modules exists when the time has come to display the parameter, the IPC will display dashes on the DIC.

The vehicle information display parameters are displayed in the following order:

1. RANGE
2. MPG AVG
3. MPG INST
4. FUEL USED
5. AVG MPH
6. TIMER
7. BATTERY VOLTS
8. TIRE PRESSURE
9. TACHOMETER
10. ENGINE OIL LIFE
11. TRANS FLUID LIFE
12. PHONE
13. FEATURE PROGRAMMING
14. Blank display

When the INFO Up button is pressed, the DIC will display the next parameter on the list. When the INFO Down button is pressed, the DIC will display the previous parameter on the list.