LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gages, And Console >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

  1. Connect the courtesy lamp electrical connector (1).
  2. Align the closeout panel on the I/P.
  3. Push upward on the panel in order to secure the locking tabs (2).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the closeout retaining screws (3)

    Tighten 

    Tighten the fasteners to 2 N.m (18 lb in).

    Fig 1: Installing Right Closeout Panel
    G02095556Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals