LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disabling & Activating Air Bag System >> Activating System >> Zone 3

Zone 3

  1. Ensure ignition is off and key is removed. Connect driver-side air bag module connector to harness connector. See Figure. Install Connector Position Assurance (CPA) clip. Install left end of instrument panel.
  2. Install SIR fuse in right rear fuse center, located under rear seat cushion. See Figure. Install rear seat cushion. See REAR SEAT CUSHION  under REMOVAL & INSTALLATION. Staying well away from air bag modules, turn ignition on. Check SIR system for proper operation. See SYSTEM OPERATION CHECK .
scientia non olet · About LEMON Manuals