Installation Procedure

Install the console latch to the console tray.
Install the screws that retain the console lid latch to the console tray.
Tighten the console latch screws fully driven, seated, but not stripped.
If equipped with UV8, install the mobile telephone storage tray (1) to the console tray (2).

Fig 1: Installing Mobile Telephone Storage Tray & Console Tray
Courtesy of GENERAL MOTORS CORP.
Install the 4 screws (1) that retain the mobile telephone storage tray to the console tray (2).
Tighten the console insert tray screws (1) fully driven, seated, but not stripped.
Verify proper operation of the console door latch, and striker.

Fig 2: Installing Screws & Armrest Inner Trim Panel Console Compartment Door (Lower)
Courtesy of GENERAL MOTORS CORP.