Removal Procedure
CAUTION:
Refer to SIR HANDLING CAUTION
.
- Open the IP storage compartment door.
- Remove the Audio Visual (A/V) adapter from the instrument panel (IP) storage compartment, if equipped. Refer to AUDIO/VIDEO WIRING HARNESS REPLACEMENT .
- Remove the IP compartment lamp. Refer to INSTRUMENT PANEL (I/P) STORAGE COMPARTMENT LA .
- Lift the IP storage compartment door slightly and twist the compensator rod 1/4 turn in order to disengage the end of the compensator rod from the IP storage compartment door.
- Remove the screws (1) from the IP storage compartment bin.
- Partially remove the IP storage compartment from the IP assembly.
- Disconnect the electrical connectors and guide the IP storage compartment lamp lens/connector out of the opening in the IP storage compartment.
- Remove the IP storage compartment.