LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Seville STS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Compartment Replacement - Instrument Panel (I/P) >> Installation Procedure

Installation Procedure

  1. When installing a new IP storage compartment the original lock cylinder will need to transferred to the new IP storage compartment. Refer to Lock Cylinder Replacement - Instrument Panel (I/P) Compartment Door 
  2. Partially install the IP storage compartment to the IP.
  3. Connect the electrical connections and guide the IP storage compartment lamp through the opening in the IP storage compartment.
  4. Install the IP storage compartment to the IP.
  5. Install the IP compartment lamp. Refer to INSTRUMENT PANEL (I/P) STORAGE COMPARTMENT LA .
    NOTE: Refer to FASTENER NOTICE .
  6. Install the screws (1) that retain the IP compartment to the IP.

    Tighten 

    Tighten the screws to 1.5 N.m (14 lb in).

  7. Install the A/V adapter, if equipped. Refer to AUDIO/VIDEO WIRING HARNESS REPLACEMENT .
    Fig 1: Installing IP Storage Compartment
    G01796293Courtesy of GENERAL MOTORS CORP.
  8. lift the IP storage compartment door in order to install the compensator rod to the IP compartment door.

    Twist the compensator rod 1/4 turn, in order to secure the compensator rod to the door.

  9. Inspect the IP storage compartment for proper operation.
    Fig 2: Installing IP Compartment Lamp
    G01796294Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals