LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Seville SLS >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Trim Plate Replacement - Console >> Installation Procedure

Installation Procedure

  1. Connect the electrical connectors.
  2. Guide the forward edge of the trim panel (1) into the lower instrument panel (IP) opening.

    Important:  Make sure the retainers are aligned properly before attempting to engage the trim plate.

  3. Align the trim panel retainers with the top of the console, and press down firmly in order to engage the console trim panel.
  4. Shift the vehicle into park (P).
  5. Remove the blocks from the wheels.
    Fig 1: Installing RH Rear Corner Retainer
    G01796402Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals