Security Indicator Inoperative
Security Indicator Inoperative
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Theft Deterrent System Schematics Connector End View Reference: Theft Deterrent System Connector End Views |
||||
| 1 | Did you perform the Theft Deterrent Diagnostic System Check? | - | Go to Step 2 | Go to Diagnostic System Check - Theft Deterrent |
| 2 |
|
- | Go to Theft Systems Description and Operation and Vehicle Theft Deterrent (VTD) Description and Operation | Go to Step 3 |
| 3 | Replace the instrument cluster (IPC). Refer to INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT
. Did you complete the replacement? |
- | Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |