LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Power Accessory Outlet Cover Replacement - Floor Console >> Removal Procedure

Removal Procedure

  1. Remove the floor console bezel. Refer to Bezel Replacement - Floor Console (Luxury) .
  2. Remove the storage bin. Refer to Console Storage Bin Replacement (Non-Luxury)  or Console Storage Bin Replacement (Luxury)  .
  3. Remove the floor console end panel. Refer to Center Console End Panel Replacement .
    NOTE: Do not disconnect the electrical connectors.
  4. Separate the end panel from the console in order to gain access to the retaining screws.
  5. Remove the 2 screws (1) retaining the power outlet cover to the console end panel.
  6. Remove the cover from the end panel.
    7. Fig 1: Locating 2 Power Accessory Outlet Cover Retaining Screws
    G01697341Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals