LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Lock Cylinder Replace - Console Compartment Door >> Installation Procedure

Installation Procedure

  1. Install a new lock cylinder (2) by pressing inwards until it is seated.
  2. Install the retaining clip (1).
    3. Fig 1: Installing Lock Cylinder Retaining Clip & Latch Assembly
    G01697321Courtesy of GENERAL MOTORS CORP.
  3. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
  4. Install the inside panel.
    NOTE: Refer to FASTENER NOTICE .
  5. Install the 11 screws. Tighten the screws to 1.6 N.m (14 lbs in).
    6. Fig 2: Installing 11 Lock Cylinder Retaining Screws
    G01697322Courtesy of GENERAL MOTORS CORP.
  6. Inspect the operation of the top compartment door.
  7. Install the compartment door to the console. Refer to Door Replacement - Console Compartment 
scientia non olet · About LEMON Manuals