LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Knee Bolster Replacement (Non-Luxury) >> Installation Procedure

Installation Procedure

  1. Snap the top of the knee bolster into the IP assembly.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the knee bolster screws. Tighten the screws to 2 N.m (18 lbs in).
  3. Install the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
    4. Fig 1: Installing Knee Bolster Screws (Non-Luxury)
    G01697229Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals