LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Installation Procedure

Installation Procedure

  1. Connect the IP cluster harness to the IP cluster.
    2. Fig 1: Installing IP Cluster Harness
    G01697259Courtesy of GENERAL MOTORS CORP.
  2. Install the IP cluster onto the IP with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the screws that retain the IP cluster to the IP assembly. Tighten the screws to 2 N.m (18 lbs in).
  4. Install the IP cluster trim plate bezel. Refer to Bezel Replacement - IP Cluster .
    5. Fig 2: Installing IP Cluster Retaining Screws
    G01697260Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals