Installation Procedure
- Install the console storage bin to the console.NOTE: Refer to FASTENER NOTICE .
- Install the 2 retaining bin screws. Tighten the screws to 2 N.m (18 lbs in).
- Install the rear cupholder by pushing the unit in until the cupholder locks into place.
- Install the 4 bolts retaining the console to the bracket. Tighten the bolts to 2 N.m (18 lbs in).
- Install the bin screws. Tighten the screws to 2 N.m (18 lbs in).
- Close the console.