Installation Procedure
- Place the console assembly in the vehicle in other to connect the wire connector.
- Connect the wire connector.
- Install the console over the studs.NOTE: Refer to FASTENER NOTICE .
- Install the two front console bolts (1) to the front extension. Tighten the two bolts to 1.6 N.m (14 lbs in).
- Install the bolt (2) to the subwoofer box, if equipped. Tighten the bolt to 1.6 N.m (14 lbs in).
- Install the console bezel. Refer to Bezel Replacement - Floor Console (Luxury) .
- Install both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET .