LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Diagnostic Information & Procedures >> Scan Tool Data List

Scan Tool Data List

The scan tool data list(s) contain all the instrument panel, Gauges, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.

Use the scan tool data list(s) as directed by a diagnostic fig. Or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Instrument Cluster , Diagnostic System Check - Driver Information Systems , or Diagnostic System Check - Audible Warnings  .

Use the scan tool data list(s) only after the following is determined:

The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list fig. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.

Fig 1: Body Control Module (BCM)
G01697151Courtesy of GENERAL MOTORS CORP.
Fig 2: Driver Information Center (DIC)
G01697152Courtesy of GENERAL MOTORS CORP.
Fig 3: Scan Tool Parameters
G01697153Courtesy of GENERAL MOTORS CORP.
Fig 4: Instrument Panel Cluster (IPC)
G01697154Courtesy of GENERAL MOTORS CORP.
Fig 5: Scan Tool Parameters
G01697155Courtesy of GENERAL MOTORS CORP.
Fig 6: Powertrain Control Module (PCM)
G01697156Courtesy of GENERAL MOTORS CORP.
Fig 7: Scan Tool Parameters
G01697157Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals