LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel, Gauges & Console >> Diagnostic Information & Procedures >> Diagnostic System Check - Driver Information Systems >> Test Description

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. 2.  Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
  2. 3.  The symptom list in Symptoms will determine the correct diagnostic procedure to use.
  3. 4.  The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
Fig 1: Diagnostic System Check - Driver Information Systems
G01697147Courtesy of GENERAL MOTORS CORP.