Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle (Floor Shift Standard)

Fig 1: View Of Adapter & Bearing Assembly

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to SIR CAUTION in Cautions and Notices.

Disable the inflatable restraint steering wheel module. Refer to DISABLING SYSTEM in SIR.
Remove the steering wheel from the column. Refer to Steering Wheel Replacement .
Remove the steering column from the vehicle. Refer to Steering Column Replacement .
Remove the electronic lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle .
Remove the turn signal and multifunction switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle .
Inspect the steering column assembly for accident damage. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle .
Remove the adapter and bearing assembly (1) from the steering shaft assembly.

Fig 2: View Of Steering Shaft Assembly, Steering Column Support Assembly & Steering Column Jacket Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).

Fig 3: View Of TORX(R) Head Screws, Steering Column Support Assembly & Steering Column Jacket Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
Discard the 4 TORX® head screws (1).
Remove the steering column support assembly (2) from the steering column jacket assembly (3).