LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Repair Instructions >> Garnish Molding Replacement - Rear Upper (Tahoe/Yukon/Escalade/Suburban) >> Removal Procedure

Removal Procedure

    Fig 1: Rear Upper Garnish Molding (Tahoe/Yukon/Escalade/Suburban)
    GM623041Courtesy of GENERAL MOTORS CORP.
  1. Use the J 38778  in order to remove the rear upper garnish molding.

    Insert the J 38778  and work along the front edge of the trim panel from one end to the other.

  2. Remove the rear upper garnish molding from the vehicle.
scientia non olet · About LEMON Manuals