LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Rear Body Side - Lower Rear (Avalanche) >> Removal Procedure

Removal Procedure

    Fig 1: Rear Body Side Lower Rear Molding (Avalanche)
    GM741429Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: When any molding is removed, all retaining clips must be replaced if the molding is to be reused.
  1. Remove the retaining screw (1).
  2. Grasp the lower part of the molding.
  3. Pull outward in order to release the clips from the body panel.
scientia non olet · About LEMON Manuals