LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper (Escalade EXT) >> Removal Procedure

Removal Procedure

  1. Remove the rear license plate and attaching hardware from the rear bumper.
  2. Remove the spare tire wheel hoist guide and retaining clip. Refer to TIRE HOIST AND SHAFT REPLACEMENT .
  3. Remove the top fascia step pads. Refer to Step Pad Replacement - Top Rear Bumper  .
  4. Remove the center fascia step pad. Refer to Step Pad Replacement - Center Rear Bumper  .
  5. Remove the rear object sensors. Refer to REAR OBJECT SENSOR REPLACEMENT .
  6. Fig 1: Removing Rear Bumper Fascia (Escalade EXT)
    GM820663Courtesy of GENERAL MOTORS CORP.
  7. Remove the rear fascia from the bumper bar.