LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Wiring Harness Replacement - Door (Cargo Door) >> Removal Procedure

Removal Procedure

  1. Remove the trim panel. Refer to Trim Panel Replacement - Rear Door .
    2. Fig 1: Door Wiring Harness (Cargo Door)
    GM577898Courtesy of GENERAL MOTORS CORP.
  2. Remove the wiring contact screws.
  3. Disconnect the door wiring contact connector(s).
  4. Disconnect the window defogger wiring connectors.
  5. Disconnect the power door lock actuator connector (RHS only).
  6. Disconnect the door ajar switch connectors.
  7. Disconnect the key switch connector (RHS only).
  8. Remove the wiring harness clips.
  9. Remove the wiring harness from the door.
scientia non olet · About LEMON Manuals