LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)

Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)

  1. Remove the rear sill plate trim panel. Refer to Door Protector Replacement - Rear .
  2. Loosen the striker bolts.
    3. Fig 1: Endgate Lock Striker (Tahoe/Yukon Adjustment)
    GM570305Courtesy of GENERAL MOTORS CORP.
  3. Move the assembly, forward or backward, in order to obtain the proper close of the liftgate.
    4. NOTE: Refer to FASTENER NOTICE .
  4. Ensure that the endgate seals completely with the minimum closing effort.

    Tighten:  Tighten the striker assembly to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals