LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Power Seat System >> Repair Instructions >> Seat Back Cover and Pad Replacement - Rear (60/40 - 50/50 Split) >> Installation Procedure

Installation Procedure

  1. Working from side to side, carefully install the seat back cover over the foam pad.
    2. Fig 1: Rear Seat Back Cover & Pad (60/40 - 50/50 Split)
    GM276555Courtesy of GENERAL MOTORS CORP.
  2. Remove the cardboard from between the seat back cover and the foam pad.
  3. Engage the hook, and the loop strips that retain the seat back cover (2).
  4. Engage the J-clips that retain the seat back cover.
  5. Install the seat back plastic cover (10) to the seat back frame, if equipped.
  6. Install the head restraints (1) to the seat back. Refer to Head Restraint Replacement (Non-Cadillac)  or Head Restraint Replacement (Cadillac)  or Head Restraint Replacement (Folding) .
  7. Install the armrest to the seat back, if removed. Refer to Armrest Replacement - Rear Seat (60/40 - 50/50 Split)  or Armrest Replacement - Rear Seat (Bucket) .
  8. Install the seat back folding cover, if removed. Refer to Seat Back Cover Replacement - Rear Folding .
  9. Install the rear seat to the vehicle. Refer to Seat Replacement - Rear (60/40 Split)  or Seat Replacement - Rear (50/50 Split 2nd Rear) .
scientia non olet · About LEMON Manuals