Mirrors - Automatic Day-Night Mirror Displays SC
Mirrors - Automatic Day-Night Mirror Displays SC
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Inside Rearview Mirror Schematics | |||
| 1 | Did you review the temperature display operation of the inside rearview mirror and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Stationary Windows |
| 2 |
|
Go to TESTING FOR INTERMITTENT AND POOR CONNECTIONS | Go to Step 3 |
| 3 |
|
Go to Step 5 | Go to Step 4 |
| 4 | Test the signal circuit of the ambient temperature sensor for a short to ground. Refer to CIRCUIT TESTING
and WIRING REPAIRS
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 6 |
| 5 | Inspect for a poor connection at the harness connector of the ambient air temperature sensor. Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS
and CONNECTOR REPAIRS
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 7 |
| 6 | Inspect for a poor connection at the harness connector of the inside rearview mirror. Refer to TESTING FOR INTERMITTENT AND POOR CONNECTIONS
and CONNECTOR REPAIRS
. Did you find and correct the condition? |
Go to Step 9 | Go to Step 8 |
| 7 | Replace the ambient air temperature sensor. Refer to Ambient Air Temperature Sensor Replacement . Did you complete the replacement? |
Go to Step 9 | - |
| 8 |
IMPORTANT:
Perform the Compass Calibration and Variance procedure for the inside rearview mirror with compass. Replace the inside rearview mirror. Refer to Rearview Mirror Replacement .Did you complete the replacement? |
Go to Step 9 | - |
| 9 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |