Removal Procedure
- Remove the rear seat. Refer to SEAT REPLACEMENT - REAR (60/40 SPLIT) or SEAT REPLACEMENT - REAR (50/50 SPLIT 2ND REAR) .
- Remove the garnish molding. Refer to Garnish Molding Replacement - Rear Corner .
- Remove the trim panel. Refer to Trim Replacement - Third Pillar (Tahoe/Yukon/Escalade/Suburban) or Trim Replacement - Third Pillar (Avalanche/Escalade EXT) .
- Remove the door sill plate. Refer to Door Sill Plate Replacement - Front or to Door Sill Plate Replacement - Rear .
- Remove the quarter panel trim screws.
- Remove the quarter panel trim from the vehicle.