LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Instrument Panel, Gauges & Console >> Repair Instructions >> 12-Volt Power Supply Replacement >> Removal Procedure

Removal Procedure

  1. Remove the power supply fuse.
  2. Lift up the front cover of the socket.
  3. Insert the J 42059 into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.
    4. Fig 1: Inserting Tool Into Lighter Socket
    G01697276Courtesy of GENERAL MOTORS CORP.
  4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.
    5. Fig 2: Removing Lighter Socket Outlet
    G01697277Courtesy of GENERAL MOTORS CORP.
  5. Remove the electrical connector from the socket.
    6. Fig 3: Removing Electrical Connector
    G01697278Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals