Push Buttons: PSCAN

Any stations already stored in preset memory can be sampled by the PSCAN mode.

1. In order to use PSCAN, press the PSCAN push button.

   PSCAN will scan each of the presets and stop for a few seconds.

2. Press PSCAN or another push-button in order to stop scanning to listen to a specific station.

   PSCAN appears in the display whenever the tuner is in the PSCAN mode.

   If 1 of the stations stored on a push-button is weak, the radio display shows the channel number (P1-P6) for several seconds before advancing to the next preset station.