LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Brake Caliper Bracket >> Removal (Standard Duty)

Removal (Standard Duty)

  1. Remove the brake caliper from the mounting bracket and support the brake caliper with heavy mechanic's wire, or equivalent; Do Not disconnect the hydraulic brake flexible hose from the caliper. See REAR BRAKE CALIPER  .
  2. Remove the brake pads from the brake caliper bracket. Remove the brake pad retainers from the brake caliper bracket. See Figure .
  3. Remove the brake caliper bracket bolts. Remove the rear brake caliper bracket from the lower control arm. Use a wire brush to remove any rust and debris from the brake caliper bracket.
  4. Inspect the brake mounting and hardware. See DISC BRAKE MOUNTING HARDWARE INSPECTION  under ADJUSTMENTS & INSPECTIONS. Inspect the brake caliper bracket. Replace the brake caliper bracket if cracked or damaged.
scientia non olet · About LEMON Manuals