LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Brake Caliper Bracket >> Removal (Heavy Duty)

Removal (Heavy Duty)

  1. Remove the brake caliper from the mounting bracket and support the brake caliper with heavy mechanic's wire, or equivalent; Do Not disconnect the hydraulic brake flexible hose from the caliper. See REAR BRAKE CALIPER  .
  2. Remove the brake pads from the brake caliper bracket. Remove the brake pad retainers from the brake caliper bracket.
  3. Remove the brake caliper bracket bolts. Remove the brake caliper bracket from the backing plate. Use a wire brush to clean any debris or rust from the brake caliper bracket.
  4. Inspect the brake mounting and hardware. See DISC BRAKE MOUNTING HARDWARE INSPECTION  under ADJUSTMENTS & INSPECTIONS. Inspect the brake caliper bracket for cracks or damage. Replace the brake caliper bracket if cracked or damaged.
scientia non olet · About LEMON Manuals