Removal (Front Cable)
- Raise and suitably support the vehicle. Ensure the park brake pedal is in the full returned position. Pull down on the front cable in relieve tension on the cable. Remove the cable from the cable connector. Using Parking Brake Cable Release Tool (J-37043) depress the park brake cable retainer. Remove the park brake cable from the park brake cable support. Lower the vehicle.
- Remove left sound insulator panel to access the lever assembly. Remove the left carpet retainer. Pull back the carpet to expose the park brake cable and lever assembly. Remove the grommet from the floor pan.
- Remove the park brake assembly attaching nuts. Carefully rotate the park brake lever cam and secure. Carefully remove the front park brake cable from the park brake pedal assembly.