LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2002 >> DeVille DHS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Master Cylinder >> Removal

Master Cylinder: Removal

  1. Disconnect the electrical connector from the brake fluid level sensor. Disconnect the brake pipes from the master cylinder. Plug the open brake pipe fitting ends.
  2. Remove the 2 master cylinder mounting nuts. Remove the master cylinder.
  3. Remove the reservoir from the master cylinder if it is to be reused on a replacement master cylinder. See MASTER CYLINDER RESERVOIR  .
scientia non olet · About LEMON Manuals